Manuals / Pelco / Household Appliance / Home Security System

Pelco dx8100 manual Install the drive trays

Models: dx8100

1 40

Download 40 pages 63.45 Kb

Page 16

3.Install the drive trays:

3.Install the drive trays:

a. On the DX8100HDDI front panel, place the drive tray 1 release button in the unlocked position (refer to Figure 10).

KEY-LOCK

RELEASE BUTTON

Figure 10. Drive Tray Key-Lock in Unlocked Position

b.Press the release button (refer to Figure 11). The front flap opens.

Figure 11. Opening the Drive Tray Door

c.Using the label on the drive tray, install the drive tray in the drive bay labeled with the same number (refer to Figure 8 on page 15).

OPEN

Figure 12. Inserting the Drive Tray

d. Gently shut the drive tray door, and then return the release button to the locked position (refer to Figure 10).

4.Repeat step 3 to install all other drive trays in numerical order.

5.Verify that each drive tray is installed in the correct drive bay.

6.Return the retention latch to its closed position (refer to Figure 9 on page 15).

16	C3648M (7/08)

Image 16

Pelco dx8100 manual Install the drive trays

Contents

C3648M 7/08 DX8100 Series Digital Video RecorderI N S T A L L A T I O N SCSI Card and External Video StorageContents List of TablesImportant Safety Instructions Other DX8100 Optional AccessoriesList of Illustrations C3648M 7/08C3648M 7/08 Regulatory Notices Important Safety InstructionsRADIO AND TELEVISION INTERFERENCE ABOUT THE EXTERNAL STORAGE UPGRADE IntroductionDX8100-ISCI SCSI CARD Parts List and ToolsDX8100HDDI EXTERNAL VIDEO STORAGE OTHER DX8100 OPTIONAL ACCESSORIES DX8100-ISCI SCSI Card Installation PREPARING THE SCSI CARD FOR INSTALLATIONOPENING THE CHASSIS WARNINGSUNDERSTANDING THE COMPONENT LAYOUT MOVING THE MAIN CAPTURE CARD INSTALLING THE SCSI CARD REASSEMBLING THE UNIT Installing a New DX8100 and DX8100HDDI System INSTALLING THE UNITSINSTALLING THE DX8100HDDI DRIVE TRAYS Once installed, refer to Installing the DX8100HDDI Drive Trays3. Install the drive trays CONNECTING THE DX8100HDDI TO THE DX8100 TURNING ON THE DX8100HDDI AND THE DX8100CONFIGURING THE DX8100 HARDWARE INSTALLATIONUpgrading the DX8100 with the DX8100HDDI 9. When the Computer Management window appears, click Disk Management 2 Select “Convert to Basic Disk.” a. Configure any unallocated drives 2 Click New Partition Figure 20. Unallocated Dynamic Drivesb. Perform a quick format 1 Click Next four times 2 Select the “Perform a quick format” check boxUSING ONLY DX8100HDDI EXTERNAL STORAGE 15. Click Close to exit the Computer Management application Figure 26. Selecting the Recovery Option 23. Repeat step 22 until all partitions are set to Allocation C3648M 7/08BACKING UP RECORDED VIDEO DATA OPTIONAL Upgrading the DX8100HDDI HDD Storage CapacityDELETING THE RAID ARRAY Figure 30. Entering the Telnet IP Address Figure 32. Unmapping Partitions 11. On the keyboard, press Esc twice to return to the Main Menu12. Select “view and edit Logical drives,” and then press Enter Figure 33. Main MenuINSTALLING THE NEW HDDS CREATING THE LOGICAL DRIVEOBTAINING AN IP ADDRESS UNMAP THE LOGICAL DRIVEPARTITIONING THE LOGICAL DRIVE Figure 42. Partition Logical Drive c. A warning message appears. Select Yes, and then press Enter MAPPING THE PARTITIONS Figure 48. Main Menu40. Press Enter four times FORMATTING THE DRIVES Figure 53. LUN MappingALLOCATING THE NEW DX8100HDDI DRIVES Specifications Design and product specifications subject to change without noticeELECTRICAL MECHANICALPRODUCT WARRANTY AND RETURN INFORMATION WARRANTYRETURNS REVISION HISTORYWorldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA ISO9001USA & Canada Tel 800 Fax 800 International Tel +1 559 Fax +1