Samsung DVD-HD931 manual Controlling a TV with the Remote, Troubleshooting, TV Codes, Code Brand

Controlling a TV with the Remote

The remote can also be set up to control most TVs. To program the remote, use the code that corresponds to your brand.

TV Codes

Code	Brand	Code	Brand
01	SAMSUNG_1	16	SHARP_1
02	SHARP_2	17	ZENITH
03	SONY	18	LG_3
04	MAGNAVOX	19	DAEWOO_8
05	SANYO_1	20	SANYO_2
06	LG_2	21	EMERSON
07	RCA	22	SHARP_3
08	LG_1	23	SAMSUNG_4
09	TOSHIBA	24	PANASONIC_2
10	HITACHI	25	NOBLEX
11	JVC	26	TELEFUNKEN
12	PANASONIC_1	27	NEWSAN
13	MITSUBISHI_2	28	LOEWE
14	SAMSUNG_2	29	RCA2
15	SAMSUNG_3

Troubleshooting

Before requesting service (troubleshooting), please check the following.

	Problem		Action	Page
No operations can be		• Check the batteries in the remote. May need replacing.
		•	Operate the remote control at a distance of no more than 20 feet.
performed with remote.				P5
		•	Remove batteries and hold down one or more buttons for several
			minutes to drain the microprocessor inside the remote to reset it.
			Reinstall batteries and try remote again.
Disc does not play.		•	Ensure that the disc is installed with the label side facing up.	P8
		•	Check the region number of the DVD.
5.1 channel sound is not		•	5.1 channel sound is reproduced only when the following conditions
being reproduced.			are met. :
			1) The DVD player is connected with the proper amplifier
			2) The disc is recorded with 5.1 channel sound.	P14
		•	Check whether the disc being played has the “Dolby 5.1 ch” mark
			on the outside.
		•	Check if your audio system is connected and working properly.	P42
		•	In a SETUP Menu, is the Audio Output set to Bitstream?
The	icon appears on	•	The features or action cannot be completed at this time because:
screen.			1. The DVD’s software restricts it.
			2. The DVD’s software doesn’t support the feature (e.g., angles).	P20
			3. The feature is not available at the moment.
			4. You’ve requested a title or chapter number or search time that is
			out of range.
Disc Menu doesn’t appear.		•	Check if the disc has a Menu.	P23
Play mode differs from the		•	Some of the functions selected in the Setup Menu may not work	P37~45
Setup Menu selection.			properly if the disc is not encoded with the corresponding function.

1Turn on the TV

2Point the DVD’s remote at the TV.

3While holding the TV POWER button down, enter the code for your brand.

4If the TV turns off, setup is complete.

Enter other codes of the same brand if the first code does not work.

5To operate the TV, use the “TV Function Buttons” described on page 13.

The screen ratio cannot	•	The Screen Ratio is fixed on your DVDs.			P43
be changed.
No audio.	•	Make sure you have selected the correct Digital Output in the			P42
		Audio Options Menu.
Forgot password	•	Press power on from a cold start with no disc in the unit. Press the
		STOP (	) and PLAY (	) buttons simultaneously on the front panel
		for three seconds. The Select Menu Language display will appear.			P44~45
		Select the desired language button. Press the MENU button on the
		remote control to select the Parental Mode. The Parental Mode is now
		unlocked as indicated on the display. Press the DOWN button to select
		Parental. Press ENTER and the Create Password display will appear.
		You can now set your rating level and change your password to a new

e.g) For Samsung_1 TVs NOTE

While holding down the TV POWER button,	The remote may not be able to control
enter 0 and then 1.	every model TV of the brands listed.

		number.	REFERENCE
If you experience other	•	Go to the contents and find the section of the instruction book that
problems.		contains the explanations regarding the current problem, and follow
		the procedure once again.
	•	If the problem still cannot be solved, please contact your nearest
		samsung authorized service center.

46 47