InFocus IN112a, IN116a Using the audio, Using the projector’s speakers, Troubleshooting Audio

Using the audio

Using the projector’s speakers connect audio cable

Connect the audio source to the Audio 1/Audio 2 connectors to hear audio through the projector speakers.

Amplified speakers may also be connected to the projector using the Audio Out connector.

To adjust the volume, press the Volume buttons on the remote.

Troubleshooting Audio

If you aren’t hearing the audio, check the following:

•Make sure the audio cable is connected to the Audio 1/Audio 2 connector on the projector, and that the other end of the cable is connected to an Audio Out connector on the source (not a “line-in” or “microphone” connector).

•Make sure the volume is turned up enough. Press the Volume button on the remote.

•Make sure the correct source is active.

•Adjust the audio source.

•If playing a video, make sure the playback has not been paused.

20