Samsung DVD-HR720/XEF manual Setting up the Audio Options, Digital Output, Dynamic Compression

Setting up the Audio Options

You can connect the HDD & DVD RECORDER to an external amp or Home theatre.

Allow you to setup the Audio device and sound status depending on the audio system in use.

1 With the unit in Stop mode, press the MENU button.

2 Press the …† buttons to select Setup, then press the OK or √ button.

Digital Output

1.PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo.

2.Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

	■	Digital output setting is equally applied to
		both Dolby Digital and MPEG-2 audio.
NOTE		LPCM sound track is always outputted as
		PCM. It has no relation with Digital
		Output setting.	System
	■	Be sure to select the correct Digital
		Output or you will hear no sound or loud

HDD

Title

Music

Photo

Programme

Setup

	Setup
System	√
Clock Set	√
Language	√
Audio	√
Video	√
Parental Control	√
Install	√

noise.

Setup

DTS

MOVE SELECT RETURN EXIT

Press the …† buttons to select Audio, then press
3 the OK or √ button.
Audio setup menu will be displayed.
			Audio
	HDD
	Title	Digital Output	: PCM	√
	Music	DTS	: Off	√
		Dynamic Compression : On		√
	Photo	V-Mode Compatibility	: Off	√
	Programme
	Setup

MOVE SELECT RETURN EXIT

4 Press the …† buttons to select the desired audio option, then press the OK or √ button.

5 Press the …† buttons to select the desired item, then press the OK or √ button.

■ Press the RETURN or œ button to return

1. Off : Doesn’t output DTS signal. Select this when your AV receiver or AV amplifier does not have DTS decoder.

2. On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifier) have DTS decoder.

■ When DTS soundtrack is played, sound does not output from AV Audio Output.

NOTE

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

1.	On : When Movie soundtracks are played at
	low volume or from smaller speakers, the
	system can apply appropriate
	compression to make low-level content
	more intelligible and prevent dramatic
	passages from getting too loud.
2.	Off : You can enjoy the movie with the

NOTE

to the previous menu.

Press the MENU button to exit the menu.

standard Dynamic Range.

English - 37