Samsung DVD-HR725/EUR Digital Output, Mode Compatibility, Dynamic Compression, Output setting

Digital Output

1.PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo.

2.Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

■Digital output setting is equally applied to both Dolby Digital and MPEG-2 audio.

NOTE	LPCM sound track is always outputted as
	PCM. It has no relation with Digital
	Output setting.

■Be sure to select the correct Digital Output or you will hear no sound or loud noise.

DTS

1.Off : Doesn’t output DTS signal. Select this when your AV receiver or AV amplifier does not have DTS decoder.

2.On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifier) have DTS decoder.

■ When DTS soundtrack is played, sound does not output from AV Audio Output.

NOTE

V-Mode Compatibility

This feature is about the setup for selecting audios when recording the NICAM STEREO (Multi-audio) broadcasting on HDD. It does not affect to the direct DVD recording of a programme.

1.Off : Both “DUAL L” and “DUAL R” of the multi- audio broadcasting are recorded on HDD.Titles recorded on HDD under such setup status cannot be copied to V mode (DVD-RW/-R).

2.On : Either “DUAL L” or “DUAL R” of the multi- audio broadcasting is recorded on HDD.Titles recorded on HDD under such setup status can be copied to DVD-R or DVD-RW (V mode). “DUAL L” and “DUAL R” options can be selected from “Audio Selection.”

Audio

HDD

Title	Digital Output	: PCM	√
Music	DTS	: Off	√
	Dynamic Compression	: On	√

Photo	V-Mode CompatibilityOff
	On
Programme

Setup

MOVE	SELECT	RETURN		EXIT
			Audio
HDD
Title	Digital Output		: PCM	√
Music	DTS		: Off	√
	Dynamic Compression		: On	√
Photo	V-Mode Compatibility		: On	√
	Audio Selection		: DUAL L √
Programme
Setup
MOVE	SELECT	RETURN		EXIT

System Setup

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

1.On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

2.Off : You can enjoy the movie with the standard Dynamic Range.

English - 39