Samsung DVD-HR725/XEH, DVD-HR725/EUR manual Copying from a Camcorder

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.

Connect the DV output jack of your camcorder to the

1 DV input jack on the front of your HDD & DVD RECORDER using a DV cable.

2	Press the	HDD	or DVD	button.
	If you select DVD, Press the			OPEN/CLOSE	button and
	place a recordable disc on the disc tray. Press the
	OPEN/CLOSE		button to close the disc tray. Wait until
	LOAD	disappears from the front panel display.
3	Press the	REC MODE		button repeatedly	to select
	the recording speed(quality).

➞SP ➞ LP ➞ EP ➞ XP

ecordingR Record Mode SP 031:39

4	Press the	INPUT	button to select	DV	.
	If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the screen.

DV

The DV device is connected.

MOVE SELECT RETURN

5	Select the Play (			√) icon on the upper part of the
	screen to playback the camcorder and find the
	starting position to copy.
	You can press the			PLAY	(	) button of the remote
	control to play the camcorder.
6	To start recording, use the					œ √ buttons to select
	Record (	● ) icon in the top side of the screen, then
	press the	OK	button.
	You can press the			REC	button of the remote control
	to start recording. To display playback related icons
	on the screen, press any direction button on the
	remote control.
- To stop recording -
Press the		STOP (	)	button to stop or finish a

recording in progress.

•When using DVD-RAM/-RW/-R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.

82 - English