10
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the pic-
ture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio
signals are delivered through the audio output.)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUTterminal on the rear of the
DVD player to the COMPONENT INterminal of TV.
2
Using the audio cables, connect the AUDIO (red and
white) OUTon the rear of the DVD player to the AUDIO
(red and white) INterminals of TV. Turn on the DVD play-
er and TV.
3
Press the TV/VIDEObutton on the TV's remote control to
select Componentor DVD.
4
Set the Video Output to Component (I-SCAN)in the
Display Setup menu. (See pages 25)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 12 to 13)
- The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”
depending on the manufacturer. The number and position of terminals can vary depending on the TV set.
Please refer to the user's manual of the TV.
RED
WHITE
RED WHITE
RED
BLUE
GREEN
RED
BLUE
GREEN
Audio Cable
Component cable
(not included)