11
English
Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUTterminal on the rear of the
DVD player to the COMPONENT INterminal of TV.
2
Using the audio cables, connect the AUDIO (red and
white) OUTon the rear of the DVD player to the AUDIO
(red and white) INterminals of TV. Turn on the DVD play-
er and TV.
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
4
Set the Video Output to Component (P-SCAN)in the
Display Setup menu. (See pages 25)
To see the progressive video output,
You need a TV set supporting the progressive scan
input function. And you have to set up the TV
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s
menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive
scanning method can provide better and clearer picture quality.
RED
WHITE
RED WHITE
RED
BLUE
GREEN
RED
BLUE
GREEN
Audio Cable
Component cable
(not included)