Rear Panel

2

SETUP ●

1

3

4

5

 

 

 

 

1.SCART JACK

-Connect to a TV scart input jack.

2.AUDIO OUT JACKS

-Connect to the Audio input jacks of your television or audio/video receiver.

3.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

4.COMPONENT VIDEO OUT JACK

-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

-If P-SCAN Video Output is selected in Setup Menu, progressive scan mode will work.

-If I-SCAN Video Output is selected in Setup Menu, interlaced scan mode will work.

5.DIGITAL AUDIO OUT JACKS

-Use coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

Note

-See pages 24-26 to get more information on how to use the setup menu.

English _7