14
Connection to an Audio System (Dolby digital, MPEG2 or DTSAmplifier)
1
If using an optical cable (not included), connect the DIGI-
TALAUDIO OUT (OPTICAL) terminal on the rear of the
DVD player to the DIGITALAUDIO IN (OPTICAL) terminal
of the Amplifier.
If using a coaxial cable (not included), connect the DIGI-
TALAUDIO OUT (COAXIAL) terminal on the rear of the
DVD player to the DIGITALAUDIO IN (COAXIAL) termi-
nal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-
VIDEO or COMPONENT OUT terminals on the rear of the
DVD player to the VIDEO, S-VIDEO or COMPONENT IN
terminal of TV.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input in order to hear sound from the DVD player.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26 to 27)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
Optical Cable
(not included)
Coaxial Cable
(not included)
OR
Dolby digital or
DTS amplifier
560 XEL Eng 5/2/06 1:22 PM Page 14