Samsung DVD-P750/SED, DVD-P750/XEL manual Rear Panel, Connect to a TV scart input jack

S E T U P

Rear Panel

26

Setup

1 2 3 4 5 7

1.5.1CH ANALOG AUDIO OUT JACKS

-Connect to an amplifier with 5.1ch analog input jacks.

2.DIGITAL AUDIO OUT JACKS

-Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

3.AUDIO OUT JACKS

Connect to the Audio input jacks of your television or audio/video receiver.

4.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

-The Video Output in Setup Menu must be set to Component (I-SCAN) or COMPOSITE/S-VIDEO.

5.S-VIDEO OUT JACK

-Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality.

-The Video Output in Setup Menu must be set to

COMPOSITE/S-VIDEO.

6.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

-If Component (P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work.

-If Component (I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work.

7.SCART JACK

-Connect to a TV scart input jack.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.

-There may be no image output if the DVD player is connected to a TV or display that is not compatible with the above format.

-See pages 64 ~ 65 to get more information on how to use the setup menu.

ENG-9