C O N N E C T I O N S

Connection to a TV (Progressive)

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

 

 

 

RED

BLUE

GREEN

 

RED

 

WHITE

 

 

Audio Cable

 

 

 

 

 

 

 

 

 

Component cable

 

 

RED

BLUE

GREEN

(not included)

RED

WHITE

 

 

 

 

 

4

Set the Video Output to Component (P-SCAN)in the Display

Setup menu. (See pages 64 to 65)

You can use the VIDEO SEL. button to change the Video

Output mode. (See page 11)

To see the progressive video output,

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-Depending on your TV, the connection method may differ from the illustration above.

Note

-What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality.

ENG-14

Page 14
Image 14
Samsung DVD-P750/XEL, DVD-P750/SED manual Connection to a TV Progressive, What is Progressive Scan?