Samsung DVD-R120/XET manual Method 2 Connecting to an S-Video input jack, Method 3 Connecting to

Method 2 : Connecting to an S-Video input jack

Connect an S-Video cable(not supplied) between the S- VIDEO OUT jack on DVD Recorder and S-VIDEO IN jack on your TV (or AV amplifier).

●You will enjoy high quality images. S-Video separates the picture element into black and white (Y) and color

(C) signals to present clearer images than regular video input mode.

●Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV(or AV amplifier).

(See pages 18 to 19)

4.The message “Please set your TV to Progressive input, To deactivate, press [STOP] key.” will appear.

Press the ENTER button.

5.The message “Video Output Mode Progressive Scan” will appear.

2

COMPONENT

Y

1

Pb

Pr

●You will enjoy high quality accurate color reproduction images. Component video separates the picture element into black and White(Y), blue(PB), red(PR) signals to present most clear and clean images.

●Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV(or AV amplifier).

(See pages 18 to 19)

Connecting & Setting UP

Method 3 : Connecting to		■	Make sure that the color coded
			connections match. The Y, PB, PR
Component video input
	NOTE
			component output jacks of your DVD
jacks(Y,PB,PR)			Recorder must be connected to the exact
			corresponding component input jacks on
			your TV.

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on your TV (or AV amplifier).

2.If the TV connected supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to enjoy higher quality video.

3.The message “Press [Yes] to confirm Progressive scan mode. Otherwise press [No]” will appear.

Press the œ √ buttons to select Yes, and then press the ENTER button.

English -17