Samsung DVD-R130S Display If an unused DVD-RW disc is inserted, the message, Press the REC button

Recording from External Equipment

Before you start

Check that the disc has enough available space for the recording. Adjust the record mode.

1Press the OPEN/CLOSE button, and place a recordable disc on the disc tray.

2Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel

display.

If an unused DVD-RW disc is inserted, the message

“Uninitialized Disc Do you want to initialize this disc?” will appear (See page 44)

3Press the INPUT SEL. button to select the input source according to the connection you made.

The front panel display changes in the following sequence:

➞Channel Number ➞ AV1 ➞ AV2 ➞ DV

If you’ve connected a digital camcorder, press the

INPUT SEL. button to select DV. (See page 48)

Press the REC MODE button repeatedly, (or press
4 the REC MODE button and then press the	…†

button) to select the recording speed(quality).

➞SP ➞ LP ➞ EP ➞ XP

Record Mode XP (01:11)

5 Press the REC button.

To stop recording

Press the STOP ( ) button to stop or finish recording in progress.

•When using DVD-RW/DVD-R discs, the message ‘Updating the information of disc. Please wait for a

moment .’ is displayed.

■	You can not change the record mode and
NOTE	input source during recording.

■Recording will stop automatically if there is no free space left for recording.

■Up to 99 titles can be recorded onto a disc.

■Recording will stop automatically if a copy protected image is selected.

■DVD-RW discs must be formatted before starting to record. Most new discs are sold unformatted.

■Do not use DVD-R authoring discs with this unit.

Recording

English - 47