Samsung DVD-SH871M/XEU manual Using the Video PLUS+ Feature, Deleting a Scheduled List

Deleting a Scheduled List

SXCVKL

Follow these directions to delete an entry from the Scheduled List.

NUsing the TIMER button

1.With the unit in Stop mode, press the TIMER button.

2.Press the ▲▼ button to select the Scheduled List, then press the OK or ► button.

3.Press the ▲▼ buttons to select the number of the Scheduled List you want to delete, and then press the GREEN(B) button.

•You will be prompted with the delete confi rm message such as “Do you want to delete?”.

4.Press the ◄ ► buttons to select Yes, then press the OK button.

•The selected entry will be deleted from the list.

5.Press the EXIT () button after fi nishing the operation. The Scheduled List screen will disappear.

● RECORDING

USING THE VIDEO PLUS+ FEATURE

Before presetting your HDD & DVD Recorder.

•Switch on both the television and your HDD & DVD Recorder.

•Check that the date and time are correct. Up to twelve programmes can be preset.

1.With the unit in Stop mode, press the TIMER button.

2.Press the ▲▼ buttons to select Video Plus+, then press the OK or ► button.

•A message is displayed to allow you to enter the Video Plus+ code.

3.Press the number buttons to enter the code of the programme that you want to record in your television magazine.

•If you want to correct the Video Plus+ code that you are entering: - Press the ◄ button until the digit to be corrected is cleared.

SXCVKL

HDD & DVD RECORDER			Video Plus+
HDD
Library
Guide	Enter Video Plus+ Code number. [0-9]
Channel
Timer Record	(Press [OK] button : Make Code)
Disc Manager
Setup
0-9 NUMBER	sSELECT	rRETURN	eEXIT

- Enter the correct digit.	HDD							Scheduled List
							Current Time 10:54
4. Press the OK button.
	No. To		Source	Date	Start	End	Mode PDC
• The information concerning the programme is displayed.	No.01 No Title
		To	Source	Date	Start	End	Mode		PDC
• When using the Video Plus+ function for the fi rst time with
stored stations, the programme number fl ashes. This one time,		HDD	– –	JAN 01	10:54	12:54	SP		Off
	Recordable Time HDD 108:14 SP						Title	sSave
you must enter the PR number manually by pressing the ▲▼
	Recordable Time HDD 65:19 XP				Recorded List
buttons.
	< MOVE		sSELECT		rRETURN				eEXIT

5.Press the RED(A) button if you do not want to use the default title name.

The rename screen is displayed.

Follow steps 4 and 5 of “Renaming (Labeling) a Title” on pages 82~83.

6.If the programme and times are correct, press the OK button.

7.Turn the power off by pressing the STANDBY/ON button to activate the timer recording setting.

English _79