Samsung DVD-SH871M/XEU manual Case 2 Connecting to a TV with DVI Jack

connecting & setting up

Case 2 : Connecting to a TV with DVI Jack

•Using the DVI Adapter cable (not supplied), connect the HDMI OUT jack on the rear of the HDD & DVD Recorder to the DVI IN jack of your TV.

•Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the HDD & DVD Recorder to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD Recorder and TV.

•Press the input selector on your TV remote control until the DVI signal from the HDD & DVD Recorder appears on your TV screen.

Red White

J To use HDMI cable (not supplied), make the Audio/Video connection before plugging in the power cord or after finishing the “Plug & Play Setup.” Do not connect the HDMI cable while the “Plug & Play Setup” is progressing.

Progressive scan automatically activates when HDMI is connected.

If TV/HDMI Receiver does not support DTS, Audio output is not available when you play a disc in DTS format.

You can switch from the HDMI output to other output only in stop mode.

If you use an HDMI cable to connect a Samsung TV to the HDD & DVD Recorder, you can operate the recorder using the TV remote control.

(This is only available with SAMSUNG TVs that support Anynet+(HDMI CEC).) (See pages 37~38)

Please check the n logo (If your TV has an n logo, then it supports Anynet+ function.)

M HDMI (High Definition Multimedia Interface)

HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Since HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that HDMI supports multi-channel audio. Using HDMI, the HDD & DVD Recorder transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

28_ connecting & setting up