Samsung DVD-V9650 instruction manual ENG-22

C O N N E C T I O N S

Connection to an Audio System (Dolby digital, MPEG2 or DTS

Amplifier)

1

Using a coaxial cable or an optical cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) or DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD-VCR to the DIGITAL AUDIO IN (COAXIAL) or DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO, S-VIDEOor COMPONENT OUT terminals on the rear of the DVD-VCR to the VIDEO, S-VIDEOor COMPONENT IN terminal of your TV as described on pages 15 to 18.

3

Turn on the DVD-VCR, TV, and Amplifier.

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD-VCR.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Notes

Coaxial Cable (not included)

Optical Cable (not included)

Dolby digital or

DTS Amp.

-When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-22