Playback

English - 57

Variable SearchSystem
Press the ANYKEY button to display the search screen in
the stop mode. When a program is recorded, the starting
point is given an Index mark for easy location. However, the
VHS Index Search System (VISS) cannot recognize index
marks made by old VCRs. If the VCR has trouble finding a
mark, it is probably because the cassette was recorded on a
VCR without VISS. If you want to index two programs in a
row, set your VCR to stop, then start recording each
program.

Go to [0:00:00] stop

1

End search

Use this feature when you want to search for a blank
position to record a program on a cassette. While a
cassette is stopped, press the ANYKEY button. The
VCR will fast forward, searching for a blank position,
and then automatically stop at that position. If the
VCR reaches the end of the tape during end search,
the tape will be ejected.
2

Scan and play

Use scan and play when you don’t know exactly
where a program is located on a cassette tape.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press the
ENTER button.
- Reverse Intro Scan
Highlight “Reverse Intro Scan”, then press the
ENTER button.
3
Use this feature when you want to search for the
[0:00:00] counter position on a cassette. Press the
CLEAR button at the point on the tape where you
want to set the counter to [0:00:00].
While a cassette is stopped, press the ANYKEY
button. The VCR will rewind or fast forward,
searching for the [0:00:00] counter position, and
then automatically stop at that position.