Samsung DVD-VR325/EUR, DVD-VR325/XEG manual Making a One Touch, Recording OTR, To stop recording

Making a One Touch	Making a Timer
Recording (OTR)	Recording

One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 9 hours by pressing the REC button.

1	Press the PROG/TRK	( /	) buttons or number
	buttons to select the station to record.
	If you want to record through a connected external
	component, press the INPUT SEL.		button to
	select an appropriate external input (AV1, AV2,
	AUX or DV).
2	Press the REC	button.
3	While in Record mode, press the REC button
	again to activate One-Touch Recording (OTR).

•Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for exactly 30 minutes.

1.Check the antenna cable is connected.

2.Check the remaining time of the disc.

3.Check the date and time are correct.

Make sure the Clock (Setup-Clock Set) must be set before you proceed with a timer recording.

(See page 24)

1	Press the OPEN/CLOSE	button, and place a
	recordable disc on the disc tray.
2	Press the OPEN/CLOSE	button to close the disc
	tray.
	Wait until LOAD	disappears from the front panel
	display.
3	With the unit in Stop mode, press the MENU
	button.
4	Press the …† buttons to select Programme		, then
	press the OK or √ button.

4	Continue pressing REC button to add recording
	time in 30 minute increments up to 9 hours.

•The DVD Recorder & VCR stops recording automatically when the time has elapsed.

❚To stop recording

DVD-RAM(VR)

Disc Navigation

Playlist

Disc Manager

Copy

Programme

Setup

MOVE

Programme

ShowView		√
Standard Timer		√
ShowView Extended	: Off	√
OK	RETURN	EXIT

Recording

Press the STOP	(	) button.
The message “Press STOP			button once more to
cancel Timer Record” is displayed.
Press the STOP	(	) button again.

The message “Updating the Information of disc. Please wait for a moment” is displayed.

■ The timer counter decreases by the minute from 9:00 to 0:00, then the DVD Recorder &

Note VCR stops recording.

5Press the …† buttons to select the Standard Timer , then press the OK or √ button twice.

• The Timer Recording screen is displayed.

DVD-RAM(VR)

Scheduled Record List

No.

No. 01

01

√

02

To

PR

Day

Start

End

Speed

V/P

√

03

√

04

DVD

AUX

SA

T01

11:00

13:00

SP

Off

√

05

Recordable Time 01:23 SP

√

06

√

MOVE

OK

RETURN

EXIT

English - 61