|
| With the Sanitize option selected, the water temperature is increased to 70 ˚C | |
7 | Sanitize | for high temperature sanitization. | |
|
| You cannot select the Sanitize option if you select the Delicate cycle. | |
|
|
| |
|
| Use this option when you want to dry your dishes more completely. | |
|
| The temperature rises to 65 ˚C in the fi nal rinse cycle and dry time is increased. | |
|
| If you select the this option, electricity consumption is increased. | |
|
| *Child Lock : This option allows you to lock the buttons on the control panel - | |
|
| except the Power button - so children cannot accidently start the dishwasher | |
|
| by pressing the buttons on the panel. Only the Power button remains active. | |
8 | Dry+ (Child Lock) | To lock or unlock the buttons on the control panel, press and hold the Dry+ | |
|
| (Child Lock) button for three (3) seconds. | |
|
| • When the Power is On : Press and hold the “Dry+ (Child Lock)” button for | |
|
| three (3) seconds. | |
|
| • When the Power is Off : Push the Power button fi rst, and then press and | |
|
| hold the “Dry+ (Child Lock)” button for three (3) seconds. | |
|
| • Child Lock remains active until you turn it off. You cannot select cycles or | |
|
| options or start the dishwasher when Child Lock is on. | |
|
| Displays cycle time and remaining hours and minutes, Delay Start hours, and | |
|
| check messages. | |
|
| If an problem occurs during an operation, an check message is displayed with | |
|
| a warning sound. | |
|
| Refer to the “Troubleshooting and information codes” section on page 32. | |
|
| Child Lock indicator | |
|
| - Turns on if the Child Lock is set (or the dishwasher is in the standby or | |
|
| pause modes). | |
|
| - Turns off while the dishwasher is operating. | |
|
| - When Child Lock is on, the Child Lock indicator blinks for several | |
|
| seconds if any button except the Power button is pressed. | |
|
| Self Clean indicator | |
|
| - Turns on when the Self Clean option is enabled (or the dishwasher is | |
9 | Display | in the standby or pause modes), but turns off while the dishwasher is | |
operating. | |||
|
| ||
|
| - Blinks for 5 seconds every 20 to 22 cycles. | |
|
| - The cycle counter disappears when the Self Clean operation is complete | |
|
| or when the dishwasher reaches the 23rd cycle without the Self Clean | |
|
| cycle being used. (The Reset or Self Clean operation is not counted by | |
|
| the cycle counter.) | |
|
| Rinse Refill indicator | |
|
| - Turns on if the dishwasher runs out of rinse aid (or the dishwasher is in | |
|
| the standby or pause modes). | |
|
| - Turns off while the dishwasher is operating. | |
|
| Lack of salt indicator (*applicable models only) | |
|
| - Turns on when the water softener runs out of salt. (or the dishwasher is | |
|
| in the standby or pause modes.) | |
|
| - Turns off while the dishwasher is operating. | |
|
|
|
English - 13
UP SETTING 02
User |