Setting the Sleep Timer

The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours.

Note

If you wish to switch the unit off at a specific time, refer to

 

page 19.

1Make sure that you have selected either COOL or HEAT mode.

2Press the button one or more times until appears on the

remote control.

Result: The indoor unit beeps.

The air conditioner will be controlled as indicated in the illustrations below.

Cooling The desired temperature is increased by 1°C every hour. When it has been increased by 2°C (after two hours), the temperature is maintained for four hours.

 

2° C

 

 

 

1° C

 

 

Set

 

 

 

TEMP.

1hr

2hr

6hr

 

Start

 

Stop

 

time

 

time

Heating The desired temperature is decreased by 1°C every hour. When it has been decreased by 2°C (after two hours), the temperature is maintained for four hours.

 

Start

 

Stop

 

time

 

time

Set

1hr

2hr

6hr

TEMP.

-1°C

 

 

 

 

 

 

-2°C

 

 

To Cancel the Sleep Timer

If you no longer wish to use the Sleep Timer that you have set, you can cancel it at any time.

Press the button.

Result: The indoor unit beeps.

The is no longer displayed.

The air conditioner operates normally.

E-20

Page 20
Image 20
Samsung E R DB68-01448A(5) manual Setting the Sleep Timer, To Cancel the Sleep Timer