■The RECORDING mode function can be set up by using the camera buttons.
POWER button
●Used for turning the camera’s power on / off.
●If this camera isn’t operated during the specified time
(about 60 SEC.), the camera power will be idle (LCD 
monitor : OFF, Camera status lamp : ON) automatically.
To use the camera again, press any of the camera buttons
except the power button. If there is no operation during the specified time after the idle mode, the camera power will
be turned off automatically to save battery life. Refer to page 70 for more information about the auto power off function.
SHUTTER button
●Used for taking an image or recording voice in the
RECORDING mode.
●In MOVIE CLIP mode
Pressing the shutter button down fully starts the process
for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again.
●In STILL IMAGE mode
Pressing the shutter down fully takes the image and stores the relevant data regarding the shot. If you select voice memo recording, the recording will start after the camera has finished storing the image data.
《23》