Samsung EC-D1030BBF/E1, EC-D1030SBF/E1 manual Connecting to a Power Source

Identification of features

■Self-timer lamp

	Icon		Status		Description
				For the first 8 seconds, the lamp blinks at 1 second
			Blinking	intervals.
				For the final 2 seconds, the lamp blinks quickly at 0.25-
				second intervals.
			Blinking	For the 2 seconds, the lamp blinks quickly at 0.25-second
				intervals before taking a picture
			Blinking	A picture will be taken after about 10 seconds and 2
				seconds later a second picture will be taken.
■Camera Status Lamp
		Status			Description
	Power on				The lamp turns on and off when the camera is ready to
					take a picture
	After taking a picture				The lamp blinks while saving the image data and turns
					off when the camera is ready to take a picture
	While voice memo recording				The lamp blinks
	While voice recording				The lamp blinks
	Transmitting Data with a PC				The lamp turns on (LCD monitor turns off)
	When the USB cable is				The lamp is off
	inserted to a printer
	When the printer is printing				The lamp blinks
	When the AF activates				The lamp turns on (The camera focus on the subject)
					The lamp blinks (The camera doesn't focus on the subject)

■Mode icon: Refer to page 14~17 for more information about the camera mode setting.

MODE	AUTO		PROGRAM			MANUAL		NIGHT		PORTRAIT
Icon
MODE	CHILDREN		MOVIE		VOICE RECORDING			PLAY		-
Icon										-
MODE						SCENE
	LANDSCAPE	CLOSE UP		SUNSET		DAWN	BACKLIGHT		FIREWORKS		BEACH & SNOW
Icon

Connecting to a Power Source

■We recommend using battery supplied with the camera. The available batteries are listed below.

-Non rechargeable batteries : 2 X AA Alkaline (High Capacity)

-Rechargeable batteries : SNB-2512 (Ni-MH)

■SNB-2512 specification(optional)

Model	SNB-2512
Type	Ni-MH
Capacity	2500mAh
Voltage	1.2V x 2
Charging time	Approximately 300 Minutes(Use for SBC-N2)

※Included battery may vary depending on sales region.

《8》