![](/images/new-backgrounds/1253167/253167165x1.webp)
Setup mode
VIDEO OUT
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of machine (monitor or TV, etc.) to which the camera is connected.
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI.
Selecting the video out type
1.Turn the camera power on.
2.Select the SETUP mode( ) by rotating the mode dial.
3.[SETUP 1/3] menu will display.
4.Select [SETUP 2/3] menu by pressing the RIGHT() button.
5.Press the UP()/ DOWN(
) button and select [VIDEO OUT].
6. Press the RIGHT( ) button and the sub menu will display.
7.Select [NTSC] or [PAL] by pressing the UP()/ DOWN(
) button.
8.Press the OK button to confirm the setting.
SETUP | 2/3 |
DATE IMPRINT | ON |
DATE TYPE | Y/M/D |
DATE SETUP |
|
VIDEO OUT | NTSC |
|
|
| CHANGE: |
|
|
SETUP | 2/3 |
VIDEO OUT |
|
NTSC |
|
PAL |
|
|
|
BACK: | SET:OK |
|
|
ADVANCED
INFORMATION
NTSC | : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. |
PAL | : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, |
| Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, |
| Thailand, Norway. |
| 83 |