SETTING UP THE CAMERA SYSTEM
POWER OFF
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage.
You can set the power to switch off at any specified time(1, 3, 5, 10, 30MIN) from the last operation. Note that the automatic power off does not operate if the camera is in slide show or PC mode.
1.Turn the camera power on.
2.Rotate the mode dial to the SETUP mode.
3.A menu will display on the LCD monitor.
4.Press UP ( 
) / DOWN ( 
) button and select [POWER OFF].
5.The cursor can be moved by pressing the RIGHT ( 
) button to the [POWER OFF] sub menu.
6.Select the desired sub menu by pressing the UP ( 
) / DOWN ( 
) buttons. The default is 3MIN.
7.After selecting the desired sub menu, press the OK button to confirm the setting.
POWER OFF
|
| FORMAT | 01 MIN | |
|
| |||
|
|
|
|
|
|
| 3 MIN | 03 MIN | |
02/ | 01/ 01 | 05 MIN | ||
|
| ON |
| 10 MIN |
|
| NTSC | 30 MIN | |
|
|
|
| |
P1 | SELECT OK SET | |||
|
|
|
|
|