DPOF : Print size

■You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers.

PictBridge

■You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly.

Movie clips and voice files cannot be printed.

●Setting the Print Size

1.Select the [Size] menu by pressing the UP / DOWN button and press the RIGHT button.

2.Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to be

changed printed size is displayed.

-Up / Down / Left / Right : Select an image.

-Zoom W / T Button : Change the print size.

-OK button : Your changes will be saved and the

menu will disappear.

[All Pics] : Change print size of all saved images.

-W / T button : Select a print size

-OK button : Confirm the changed setting. [Cancel] : Cancel all of the print size settings.

※DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10

※Depending on the manufacturer and printer model, cancelling the printing may take a little longer for the printer to process.

 

 

 

 

 

 

 

 

 

 

 

 

 

DPOF

 

Standard

Select

 

Index

All Pics

 

Size

Cancel

 

 

 

 

 

 

 

Back:

 

 

Set:OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W

Cancel

T

 

 

Set:OK

 

 

W Cancel T

Set:OK

■Setting up the camera for connection with the printer

1.In any mode with the exception of Voice Recording mode, press the MENU button.

2.Press the LEFT / RIGHT button and select [SETUP] menu tab.

3.Select [USB] menu by pressing the UP / DOWN button and press the RIGHT button.

4.Select [Printer] menu by pressing the UP / DOWN button and press the OK button.

SETUP

AF Lamp

SoundComputer

USBPrinter

LCD

Video Out

Back:Set:OK

※If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the [USB ERROR!] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 onwards.

《49》