FAQ

Case 6 When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them.

→Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again. For Windows 98 PC, remove the camera driver also, restart the PC, and then reinstall the camera driver.

Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognise the camera as a removable disk.

→Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program.

Case 8 The camera is connected to the USB port located on the front of the computer.

→When the camera is connected to the USB port located on the front of

the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer.

■When the movie clip doesn’t play back on the PC

※When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC.

●When codec for play back the movie clip isn’t installed → Install the codec as listed below.

[ Installing codec for Windows ]

1)Insert the CD provided with the camera.

2)Run the windows explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.0.3-20122004.exe file.

※The XviD codec is distributed according to the GNU General Public Licence and everyone can copy, distribute and change this codec. This Licence applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public Licence.

For more information, see the Licence documents (http://www.gnu.org/copyleft/gpl.html).

[ Installing codec for Mac OS ]

1)Visit the following site for downloading the codec. (http://www.divx.com/divx/mac)

2)Click the [Free Download] button located at the upper right side of the page and a window for downloading the DivX codec will display.

3)Select Mac OS you use and click the [Download] button. Save it on a folder you want to.

4)Run the downloaded file and the codec for playing back the movie clip will be installed.

※If a movie clip can’t play back on the Mac OS, use a media player that supports XviD codec (Mplayer).

《73》