Samsung EC-L83ZZSDC/E2, EC-L83ZZSDA/E3 manual The Motion Timer flows are as followings, 《32》

The detection range of Motion Timer

[Selecting the 10 SEC self-timer]

Self-timer ( ) / Right button

■Selecting the self-timer

1.Select a RECORDING mode with the exception of VOICE RECORDING mode. (p.33)

2.Press the SELF-TIMER ( ) button until the desired mode indicator

displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor.

•10SEC self-timer ( ):

Pressing the shutter button will allow an interval of 10 seconds before the image is taken.

•2SEC self-timer ( ): Pressing the shutter button will allow an interval

of 2 seconds before the image is taken.

•Double self-timer ( ):

A picture will be taken after about 10 seconds and 2 seconds later a second picture will be

taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charging time.

•Motion Timer ( ) :

The camera detects the subject's movement 6 seconds after pressing the Shutter button, and the picture is taken when the movement is stopped.

3.When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

■ Motion Timer

Motion	Icon & Self-timer lamp
Pressing the Shutter button after setting	Blink (1 second interval)
the Motion Timer
Detecting the subject's movement	Blink (0.25 second interval)
No movement is detected	Turn on and the image is taken after
	2 seconds.

■The Motion Timer flows are as followings.

Selecting the Motion Timer → Pressing the Shutter button → Confirming the composition (Within 6 sec.)*1 → Starting the detection (Swing your hands fully)*2

→Stopping the detection (Do not move) → Taking an image (after 2 sec.)

*1 : The camera detects the subject's movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds.

*2 : Move your body or hands fully.

In the following cases, the Motion Timer may not operate. ● The focus distance is over 3m.

● The exposure is too bright or dark

●In backlight conditions.

●The movement is insignificant

●The movement is detected out of the center part (50%) of the sensor where the movement is recognized.

《32》