Samsung EC-S1070SBA/IT, EC-S1070BBA/FR manual Exposure compensation, White, Custom white balance

Fn button

White balance

Using the Custom White Balance

White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.

1.	Select the CUSTOM ( Å) menu of
	the White Balance and place a sheet
	of white paper in front of the camera
	so that the LCD monitor shows only
	white.
2.	MENU/OK button : selects previous
		White	paper
	custom white balance.

Shutter button : saves new custom white balance.

-The custom white balance value will be applied, starting with the next picture you take.

-The user configured white balance will be remain effective until it is overwritten.

Exposure compensation

This camera automatically adjusts the exposure according to the ambient lighting conditions.

You can also select the exposure value by using the Fn button.

Compensating Exposure
1.	Press the Fn button, and then use the
	UP and DOWN buttons to select the
	exposure compensation icon ( Â).
2.	Use the LEFT and RIGHT buttons to
	set the desired exposure compensation	EV
	factor.
3.	Press the OK or Fn button.
	The value you set will be saved and the Exposure
	Compensation setup mode will be closed. If you change the
	exposure value, the exposure indicator ( Â) will be displayed
	on the bottom of the LCD monitor.

ÄA negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

39