Display ( 
)
Quick view
If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
Settings ( ”)
Formatting a memory
This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory.
: The quick view function can’t be activated.
[0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
DISPLAY
Language
Date&Time
Start Image
Display Bright
Quick View
Display SAVE
Back
Off
0.5sec
1 sec
3 sec OK Set
- Sub menus
[No] : The memory will not be formatted.
[Yes] : A window for confirming the se- lection displays. Select the [Yes] menu. A [Processing!] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] mes-
SETTINGS
Format
Reset
File
Imprint
Power Off
Video Out
Back
No
Yes
OK Set
Display SAVE
If you set the [Display SAVE] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically.
sage will appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card |
- A memory card that has a file this camera can't recognise or |
-Sub menus
[Off] : The LCD monitor will not be turned off.
[On] : If the camera isn't operated during the specified time (about 30 SEC.), the camera power will be idle (Camera status lamp:Blinking) automatically.
DISPLAY
Language
Date&Time
Start Image
Display Bright
Quick View
Display SAVE
Back
Off
On
OK Set
one that has been taken from another camera. |
- Always format the memory card using this camera. If you insert |
a memory card that has been formatted using other cameras, |
memory card readers, or PCs, you will get a [Card Error!] |
message. |
ÄYou can’t set the [Display SAVE] menu of Playback Mode.
48
