Samsung EC-ST1000BPSE1, EC-ST1000BPRFR manual Error messages, Error message Suggested remedies

Error messages

When the following error messages appear, try these remedies.

Error message	Suggested remedies
	t Turn off your camera and then turn it on again.
Card Error	t Remove your memory card and insert it again.
	t Format your memory card. (p. 110)
	t The camera cannot connect to the network
	using the selected access point. Select
Connection failed.	another and try again.
	t The camera fails to connect to another
	Bluetooth-enabled device or a camera of the
	same model. Try connecting again.
	File names do not match the DCF standard.
DCF Full Error	Transfer the files on the memory card to your
	computer and format the card. (p. 110)
Device	Connect to a device again.
disconnected.
File Error	Delete the damaged file or contact a service
	centre.
Initialization failed.	Turn on DLNA-authorised devices on the
	network.
	The password for transferring files to another
Invalid password.	Bluetooth-enabled device or a camera of
	the same model is wrong. Enter the correct
	password again.
Low Battery	Insert a charged battery or recharge the battery.

Error message	Suggested remedies
Memory Full	Delete unnecessary files or insert a new memory
	card.
No Image File	Take photos or insert a memory card that has
	some photos.
Photo reception	The camera fails to receive a photo from the
failed.	sending camera. Try sending again.
Transfer failed.	The camera fails to send a photo. Try sending
	again.

Appendixes 113