On Screen Display Information
In any mode with the exception of VOICE RECORDING mode, you can check the recording status in the LCD monitor or select the power save mode.
Histogram shows you the distribution of brightness in recorded images. If the bars in the histogram are higher towards the right, the image may be too bright. If the bars are higher on the left, the image may be too dark. If the lighting conditions are too bright to check the subject by using the LCD, checking the histogram will enable more precise exposure control for the shots.
OSD Information
Full OSD
Histogram
Basic OSD
Save Mode
Pixel
Distribution of brightness
Dark Bright
Idle mode : If you select the [SAVE MODE] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. To use the camera again, press any of the camera buttons except the power button. If there is no operation during the specified time, the camera power will be turned off automatically to save battery life. Refer to page 95 for more information about the auto power off function.
[Full OSD] | [Histogram] | [Basic OSD] | [Save mode : LCD off] |
57