Using AllShare Play to send files

Viewing photos or videos on devices that support AllShare Play

1Rotate the mode dial to w.

2Select “ Nearby devices.

If the guide message appears, select OK.

The camera will automatically attempt to connect to a WLAN via the most recently connected AP device.

If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 114)

You can set to allow only selected devices or all devices to connect by pressing [m], and then selecting DLNA Access Control on the screen.

A sharing file list is created. Wait until other devices can find your camera.

3Connect the AllShare Play device to a network, and then turn on the AllShare Play feature.

Refer to your device's user manual for more information.

4On the camera, allow the AllShare Play device to connect to your camera.

5On the AllShare Play device, select a camera to connect.

6On the AllShare Play device, browse the shared photos or videos.

For information about searching for the camera and browsing the photos or videos on the AllShare Play device, refer to the device's user manual.

Videos may not play smoothly depending on the type of AllShare Play device or the network condition. If this happens, re-record the video in 640 X 480 or smaller quality and play it again. If videos do not play smoothly on your device over the wireless connection, try connecting the camera to the device with an A/V cable.

AP

A camera is connected to a TV that supports AllShare Play via WLAN.

Wireless network 130

Page 131
Image 131
Samsung WB800F White, EC-WB800FBPRUS, EC-WB800FBPBUS, ECWB800FFPRUS, EC-WB800FBPWUS user manual Select “ Nearby devices