Camera: Shooting options and settings
99
•
AF lamp
: Use this to activate the AF-assist light in low-light conditions.
•
Power-on mode
: Select the default camera mode that launches when the device is
turned on.
•
Dial control (P/A/S/M)
: Set Command dial functions when you first press or rotate it on
the preview screen of expert mode.
–
Option 1
: Access the mode selection screen by rotating or pressing the Command
dial.
–
Option 2
: Access the mode selection screen by rotating the Command dial. Move
through the major shooting options by pressing the Command dial repeatedly.
–
Option 3
: Move through the major shooting options by pressing the Command dial
repeatedly. Adjust the option by rotating the Command dial.
In auto or smart mode, you can only change modes with the Command dial.
•
Storage
: Select the memory location for storage.
•
Display select
: Use this to set the proximity/light sensor to automatically adjust between
the screen and the viewfinder, or to always use the screen.
•
Horizontal calibration
: Calibrate the level gauge. If the level gauge is not level, position
the camera on the level surface, and then follow the on-screen instructions.
•
You cannot calibrate the level gauge in portrait orientation.
•
The camera must be level (not tilted up or down) to complete the calibration.
•
Sensor cleaning
: Use this to remove dust from the image sensor.
•
Lens firmware
: Update the firmware of the lens.
Before updating the lens firmware, download the firmware file into the root directory
of the internal memory or a memory card, access the Home screen, and then launch
the camera application.
•
Reset
: Reset the camera settings.