Disconnect the four cables from the circuit board.

Appendix

6

7

Remove the rubber cover.

On the right side of the speaker’s interior, remove the sticker and the four screws from the component that the sticker was attached to.

8

Remove the component and the disconnect the ribbon cable.

9

Remove the rubber cover from the ribbon cable and pull the ribbon cable from the

 

speaker.

10Remove the eight screws from the edge of the battery compartment.

11

12Remove the battery box.

13At the top of the battery box, unhook both sides of the circuit board. 14Disconnect the battery connector and remove the batteries.

English (UK)

21

19