Searching for and Storing the Radio Stations
You can store up to:
15 FM stations
15 MW stations 
7 LW stations
1 |
| Switch the system on by pressing On/Standby ( | ). | |
2 |
| Select the required frequency band by pressing Band on the | ||
|
| remote control. |
|
|
|
| Result: The appropriate indication is displayed: |
| |
|
| FM | Frequency Modulation | |
|
| AM(MW) | Medium Wave |
|
|
| LW | Long Wave |
|
3 |
|
|
| |
To search for a | Press Mode on the remote | |||
|
| station... | Control |
|
Manually 
One or more times until Manual is displayed.
Automatically 
One or more times until Auto is displayed.
PRESET function is explained in detail in the section “Selecting a Stored Station” on.
4 Select the station to be stored by:
Pressing 
or 
buttons to increase or decrease the frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the 
or 
buttons.
The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode.
5 If you do not want to store the radio station found, revert to Step 4 and search for another station.
Otherwise:
aPress Program/Set.
Result: ’Program No.’ is displayed for a few seconds.
bPress Program/Set to store the radio station.
Result: ’Program No.’ is no longer displayed and the station is stored.
6 To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station to an existing program number.
Selecting a Stored Station
GB
You can listen to a stored radio station as follows:
1 | Switch the system on by pressing On/Standby ( | ) . | |
2 | Select the required frequency band by pressing Band on the | ||
| remote control. |
|
|
3 | Select the radio station as follows. |
| |
| To listen to ... | Press ... |
|
|
|
|
|
Stored station 
1. Press the Mode button on the remote control until “Preset” is displayed.
2.Press 
or 
button to select the required program.
|
| 2 |
Program/ | VOL. | Band |
Set | 3 |
|
3 
Mode 
3
VOL.
Mono/STMute
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST. to switch from stereo mode to mono. The quality of the sound will be improved.
5 |
|
| 2 |
Program/ | VOL. |
| Band |
Set |
| 3 | 4 |
4 |
|
| |
|
|
|
Mode
VOL.
Mono/STMute
Program/ | VOL. | Band |
Set |
|
|
| Mode |
|
VOL.
Mono/STMute
14
