Wireless network > About the Wake on LAN (WOL) feature
Setting the PC to turn on
1Turn on the PC, and then press F2 while the PC is booting.
•The BIOS setting menu will appear.
2Select Advanced tab → Power management Setup.
3Select Resume on PME → Enabled.
4Press F10 to save your changes, and then continue booting.
5Click Start, and then open the Control Panel.
6Configure the network connection.
•Windows 7:
Click Network and Internet → Network and Sharing Center → Change adapter settings.
•Windows Vista:
Click Network and Internet → Network and Sharing Center → Manage network connections.
•Windows XP:
Click Network and Internet Connection → Network Connection.
7Select drivers related to network adapter.
8Click Advanced tab, and then set WOL menus.
• You cannot use this feature across a firewall or if a security program has been installed.
•To turn on the PC with the WOL feature, the PC must have an active connection to the LAN. Ensure that the indicator light on the PC’s LAN port is on indicating that the LAN connection is active.
•Depending on your PC model, the camera may only be able to wake the PC.
•Depending on your PC’s OS or drivers, the names of the WOL setting menu may vary.
-examples of setting menu names: Enable PME, Wake on LAN, etc.
-examples of setting menu values: Enable, Magic packet, etc.
122