Samsung EV-NX5ZZZBABCZ, EV-NX5ZZZBABDE manual 108, Normal setup 3, Display, Firmware, Update

Camera settings menu

Normal setup 3( 3 )

* Default value

	Display	Auto Select* : Convert between Main Display and EVF by eye sensor
		Main Display : The screen will be shown only through Main Display
	Select
		EVF : The screen will be shown only through EVF
		Select the video output signal appropriate for your country when connecting the camera to an
		external video device such as a monitor or TV.
108	Video Out	NTSC* : US, Canada, Japan, Korea, Taiwan, Mexico, etc.
		PAL (supporting only the BDGHI method) : Australia, Austria, Belgium, China, Holland, Finland,
		Germany, England, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
		Thailand, Norway, etc.
	Anynet+	When you connect the camera to an HDTV that supports Anynet+ (HDMI-CEC), you can control the
		play function of the camera with the TV remote controller (p. 91).
	(HDMI-
		On* : You can control the play function of camera with the TV remote controller.
	CEC)
		Off : You can NOT control the play function of camera with the TV remote controller.
		The resolution on an HDTV can be changed when using an HDMI cable.
		(In case of NTSC method : Auto*, 1080i, 720p, 480p)
	HDMI Size	(In case of PAL method : Auto*, 1080i, 720p, 576p)
		If the connected HDTV does not support the selected resolution, you select, the camera sets the resolution
		one level lower.
		Displays the firmware version of the camera body and lens, and upgrades the firmware.
		Body Firmware: Upgrades the firmware of the camera body.
	Firmware	Lens Firmware: Upgrades the firmware of the lens.
		• You can downloadupgrade thefirmwareupgradesby downlfroadingmwwwit .fromsasungimwww.agingmsung.co..comkror. www.samsung.com.
	Update
		• You can not run a firmware upgrade without a fully charged the battery. Recharge the battery fully before
		running a firmware upgrade or attach the adaptor to provide power (optional).
		• After upgrading the firmware, the user customized options are reset to the default value.
		(The date, time, language, and video output values are kept.)