Installing Your Microwave Oven

GB

20 cm

10 cm

above

behind

QUARTZ GRILL

10 cm

 

on the side

Place the oven on a flat, level surface strong enough to safely bear the weight of the oven.

1When you install your oven, Make sure there is adequate ventilation for your oven by leaving at least 10 cm

(4 inches) of space behind, on the sides of the oven and 20 cm (8 inches) of above.

2Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

Never block the air vents as the oven may overheat and automatically switch itself off.

It will remain inoperable until it has cooled sufficiently.

For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable (I-SHENG SP022, KDK KKP4819D, EUROELECTRIC 3410, SAMIL SP-106B, MOONSUNG EP-48E). Contact your local dealer to have it replaced. The power cable of ISRAEL is PENCON(ZD16A), S/AFRICA APEX LEADS SA16 and NIGERIA, GHANA, KENYA and U.A.E is PENCON(UD13A1).

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven.

Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

10

Page 11
Image 11
Samsung G633C/NSI, G633C(SKW), G633C(SDRW), G633C(SCAW) manual Installing Your Microwave Oven