Samsung Glyde user manual Speakerphone Plays the prompts through the speaker

-Always Off: Voice Commands never displays a choice list. Instead, the application picks the best from among the possible choices.

•Sensitivity: In Voice Commands, sensitivity controls the balance between rejecting too much, which means the phone frequently does not recognize names, numbers, or commands, and rejecting too little, which means it frequently recognizes something even if nothing was said. When Voice Commands rejects an utterance, it displays a message such as “Please repeat…” or “No match found.” If you frequently experience these messages, you might be able to get better recognition by adjusting the Sensitivity setting toward Reject Less. If you frequently experience false activations (Voice Commands detects a wrong match), you might be able to get better performance by adjusting the Sensitivity setting toward Reject More.

•Digit Dialing: Use the dialing Digit Dialing menu to adapt digit dialing to your voice.

-Adapt Digits: Lets you adapt digits, which can improve speech recognition of phone numbers. Adaptation takes about 180 seconds.

-Reset Digits: Erases any digit adaptation you have done and resets digit recognition to the factory default. If you have not adapted digits, this option is grayed out.

•Sound: You can customize the VoiceSignal user interface by turning playback on or off for prompts, names, and numbers.

-Prompts: Turns audio prompts playback (i.e. “Say a name or shortcut”) on or off.

-Digits: Turns playback on or off for digits, for example, when confirming a phone number.

-Names: Turns name playback on or off.

-Name Settings: Adjusts the speed and volume of name playback.

-Speakerphone: Plays the prompts through the speaker.

•About: Displays information about Voice Commands including version number, build number, and device model.

•Digit Dial Readout: Reads out the numbers pressed when dialing a phone number.

•Call Alert: Provides audible readout of the phone number and/or name (if in your contact list) of an incoming call.

You can also access the Voice Commands Settings menu by following these steps:

1. Press and hold the Voice Commands key ( 0 ).

2.Press the right soft key for Settings.

3.Use the Navigation wheel to select the setting you want to change.

35