Samsung GT-I9003/M4 ››Charge with the PC data cable, begins, on a PC, the device, 14Assembling, multifunction jack, device and then from the PC, •While the device is turning on

4	When the battery is fully charged (the battery icon is
	no longer moving), unplug the travel adapter from the

device and then from the power outlet.Do not remove the battery in the following conditions:

•While the device is charging or connected to a PC.

•Within 8 seconds after you unplug the travel adapter or PC data cable.•While the device is turning on.Doing so may reset your time and date setting or cause damage to the device.

To save energy, unplug the travel adapter when not in use. The travel adapter does not have a power switch, so you must unplug the travel adapter from the outlet to interrupt the power supply. The travel adapter should remain close to the socket when in use.

››Charge with the PC data cable

Before charging, ensure that your PC is turned on.

1	Open the cover to the multifunction jack on the top of
2	the device.
	Plug one end (micro-USB) of the PC data cable into the
3	multifunction jack.
	Plug the other end of the PC data cable into a USB port
	on a PC.
	Depending on the type of PC data cable you are
	using, it may take some time before charging
	begins.
4	When the battery is fully charged (the battery icon is
	no longer moving), unplug the PC data cable from the

device and then from the PC.

14Assembling