Samsung HC-P4241W manual Connecting a Digital TV Set-Top Box, Connecting a Camcorder

I N S T A L L AT I O N

Connecting a Digital TV Set-Top Box

The rear panel jacks on your TV make it easy to connect a Set-Top Box to your TV.

Connecting to Y, PB, PR

1

Connect a set of audio cables between the

“COMPONENT IN 1 (L, R)” (or “COMPONENT IN 2 (L, R)”) jacks on the TV and the AUDIO OUT jacks on the Set-Top Box.

2

Connect a set of video cables between the

“COMPONENT IN 1 (Y, PB, PR)” (or “COMPONENT IN 2 (Y, PB, PR)”) jacks on the TV and the VIDEO OUT (Y, PB, PR) jacks on the Set-Top Box.

For detailed information, refer to the Set-Top Box instruction manual.

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal Source” on page 37.)

1

Locate the A/V output jacks on the camcorder. They are usually found on the side or rear of the camcorder.

2

Connect a set of audio cables between the “AV 3 (L, R)” jacks on the TV and the AUDIO OUT jacks on the camcorder.

If you have mono camcorder, connect L(mono) to camcorder audio out using only one audio cable.

3

Connect a video cable between the “AV 3 (VIDEO)” (or “S- VIDEO”) jack on the TV and the VIDEO OUT jacks on the camcorder.

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

TV Side Panel (HC-P4241W)

•This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.

English - 16