Y O U R N E W T V

Front or Side Panel Jacks

You can use the front or side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.8.)

ŒPERFECT FOCUS

Press to adjust for the optimum picture set in the Factory.

´VIDEO INPUT jack

Use to connect a video signal from a camcorder or a video game.

ˇ AUDIO INPUT jacks

Use to connect the audio signals from a camcorder or video game.

¨ S-VIDEO INPUT jack

Use to connect an S-Video signal from a camcorder or a video game.

Using the Component Shelf

(HCM5525W/HCM653W/HCM553W/HCL473W)

You can place a VCR, a DVD player, etc. on the Component Shelf.

1

Press the symbol “ “ in the center of the Component Shelf door.

2

As shown in figure below, hold the center of door and lift it up.

3

4

After placing a com-

Shut the door by

ponent on the shelf,

pressing the “ “

hold the center of door

symbol.

and pull it down as

 

shown in figure below.

 

Note: When placinga component on the shelf, make sure it is no more than 5 inches tall and leave one inch of space from the front and sides for ventilation.

1.3 CHAPTER ONE: YOUR NEW TV

Page 10
Image 10
Samsung HCM 4216W, HCM 422W manual Front or Side Panel Jacks, ´ Video Input jack, Audio Input jacks, ¨ S-VIDEO Input jack