Samsung HM080HC, HD401LJ, HD400LJ, MP0402H, HD403LJ Spinpoint P80SD series, 40.0/80.0/120.0/160.0GB

Spinpoint P80SD series

40.0/80.0/120.0/160.0GB

Capacity1	40GB	80GB	120GB	160GB
Model	HD040GJ	HD080HJ	HD120IJ	HD160JJ

• 80GB Formatted Capacity Per Disk

• Native Serial ATA 3.0Gbps with Native Command Queuing (NCQ)

DRIVE CONFIGURATION

Interface	Serial ATA 3.0 Gbps
Buffer DRAM Size2	8 MB
Bytes per Sector	512
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to track	0.8 ms
-Average	8.9 ms
-Full Stroke	18.0 ms
-Average Latency	4.17 ms
-Rotational Speed	7,200 rpm
Maximum Data Transfer Rate
-Media to/from Buffer	845
-Buffer to/from Host	300 MB/sec
Drive Ready Time (typ.)	7 sec
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error	1 sector in 1014 bits
MTBF	500,000 POH
Start/Stop Cycles (Ambient)	50,000
Component Design Life	5 years

ENVIRONMENTAL SPECIFICATIONS

Temperature

-Operating	5~55°C
-Non-operating	-40~70°C
-Thermal Gradient (max.)	20°C/hr
Humidity (non-condensing)
-Operating	5~90 %
-Non-operating	5~95 %
Linear Shock (1/2 sine pulse)
-Operating, 2ms	63 G
-Non-operating, 2ms	350 G
Vibration (swept sine, 1 octave per minute)
Operating
5 ~ 21 Hz	0.034" (double amplitude)
21 ~ 300 Hz	1.5 Gp-p
Non-operating
5 ~ 21 Hz	0.195" (double amplitude)
21 ~ 500 Hz	8 Gp-p
Altitude (relative to sea level)
-Operating	-1,000 to 10,000 feet
-Non-operating	-1,000 to 40,000 feet

• Fluid Dynamic Bearing Spindle Motor Technology

• High Speed Dual Digital Signal Processor (DSP) Based Architecture

• ATA SMART Compliant

• ATA Security Mode Feature Set

• ATA Host Protected Area Feature Set

• ATA Automatic Acoustic Management Feature Set

• ATA 48-bit Address Feature Set

ACOUSTICS (AVERAGE SOUND POWER)

-Idle	2.5 Bel
-Random Read/Write	2.8 Bel

*Notes:Design and specifications are subject to change without prior notice

POWER REQUIREMENTS

Voltage	+5V 5% / 12V 10%
Spin Up Current(max.)	650 / 1900 mA
Seek3 (typ.)	9.0 W
Read/Write On-Track(typ.)	8.0 W
Idle(typ.)	6.8 W
Standby(typ.)	0.7 / 1.5 W5
Sleep(typ.)	0.7 / 1.5 W5

• ATA Streaming Feature Set

• ATA Power Up In Standby Feature Set

• ATA Device Configuration Overlay Feature Set

• Permuted RLL/ECC On-The-Fly Error Correction

• RoHS-compliant

• NoiseGuard™

• SilentSeek™

• Hot-Plug & Hot-Swap capable

PHYSICAL DIMENSION

Height	1 in
Width	4 in
Depth	5.75 in
Weight	1.45 lb

Specifications are subject to change without notice.

1.1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes

*Accessible capacity may vary as some OS uses binary numbering system for reported capacity

2.384 KB is used for firmware

3.30% duty cycle, random seek

4.Unless otherwise specified, specifications are for both 1 and 2 disk configurations of Serial-ATA models

5.Power consumption with / without slumber mode