Samsung HM120JI, HD401LJ, HD400LJ, MP0402H, HD403LJ, HD501LJ Spinpoint T133 series, 300.0/400.0GB

Spinpoint T133 series

300.0/400.0GB

Capacity1				300GB	400GB
Model	PATA,8MB		HD300LD		HD400LD
PERFORMANCE SPECIFICATIONS				ENVIRONMENTAL SPECIFICATIONS
Interface		ATA 6		Temperature
Bytes per Sector		512		-Operating	0~60°C
Buffer DRAM Size2		8 MB		-Non-operating	-40~70°C
				-Thermal Gradient (max.)	20°C/hr
PERFORMANCE SPECIFICATIONS				Humidity (non-condensing)
Read Seek Time (typ.)				-Operating	5~90 %
-Track to track		0.8 ms		-Non-operating	5~95 %
-Average		8.9 ms		Linear Shock (1/2 sine pulse)
-Full Stroke		18 ms		-Operating, 2ms	63 G
-Average Latency		4.17 ms		-Non-operating, 2ms	300 G
-Rotational Speed		7,200 rpm		Vibration (swept sine, 0.5 octave per minute)
Maximum Data Transfer Rate				Operating
-Media to/from Buffer(max.)		742/1000Mbits/sec		5 - 300 - 5 Hz	1.0 G0-p
-Buffer to/from Host		100 MB/sec		Non-operating
Drive Ready Time(typ.)		10 sec		5 - 500 - 5 Hz	2.0 G0-p
				Altitude (relative to sea level)
RELIABILITY SPECIFICATIONS				-Operating	-1,000 to 10,000 feet
Non-recoverable Read Error		1 sector in 1014 bits		-Non-operating	-1,000 to 40,000 feet
MTBF		600,000 POH

• Ultra ATA-100 Compliant

• Fluid Dynamic Bearing Spindle Motor Technology

• High Speed Dual Digital Signal Processor (DSP) Based Architecture

• ATA S.M.A.R.T. Compliant

• ATA Security Mode Feature Set

• ATA Host Protected Area Feature Set

• ATA Automatic Acoustic Management Feature Set

• ATA 48-bit Address Feature Set

Start/Stop Cycles(Ambient)	50,000
Component Design Life	5 years
ACOUSTICS (AVERAGE SOUND POWER)
-Idle	2.7 Bel
-Random Read/Write	2.9 Bel

*Notes:Design and specifications are subject to change without prior notice

POWER REQUIREMENTS

Voltage	+5V° 5% / +12V° 10%
Spin Up Current(max.)	880 / 2250 mA
Seek5 (typ.)	9.2	W
Read on-Track(typ.)	8.4	W
Idle(typ.)	8.0	W
Standby(typ.)	0.7	W
Sleep(typ.)	0.45	W

• ATA Streaming Feature Set4

• ATA Device Configuration Overlay Feature Set

• Multi-Burst On-The-Fly Error Correction

• NoiseGuard™

• SilentSeek™

PHYSICAL DIMENSION

Height	1 in
Width	4 in
Depth	5.75 in
Weight	1.44 lb

Specifications are subject to change without notice.

1.1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes

*Accessible capacity may vary as some OS uses binary numbering system for reported capacity

2.128KB is used for firmware

3.For ATA-6 interface models only

4.30% duty cycle, random seek

5.Power based on enabled DIPM and SATA 3.0Gbps speed