Samsung HG46NB678FFXZA installation manual PI AES Data 0xD279, Service

Menu	Item	initial Value	Description
			Configures CAS support. Applies to only the NB673, NB677, and NB678 models.
	CAS	Pro:idiom	OFF : Turns off CAS support.
			LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
			Pro:idiom : Select to turn on Pro:Idim CAS support only.
			LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
			Enter Self Diagnosis Menu.
			yy Picture Test: Use to check for picture problems. If the problem appears in the test
	Self Diagnosis		picture, select YES, and then follow the directions on the screen.
			yy Sound Test: Use the built-in melody to check for sound problems. If the problem
			occurs during the test, select YES, and then follow the directions on the screen.
	PI AES Data	0xD279	Displays the current state of Pro:Idion AES
			Lets you check the state of the TV picture and sound.
	Self Diagnosis		yy Picture Test : Use to check for picture problems. If the problem appears in the test
			picture, select YES, and then follow the directions on the screen.
	for TV
			yy Sound Test : Use to check for sound problems. If the problem occurs during the test,
			select YES, and then follow the directions on the screen.
Service			Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have
			any problems with the Pro:idiom encryption channel or the communications with the SI STB or
	Self Diagnosis		SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and
			the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems
	for HTV		related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact
			Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the
			SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a
			problem, contact to Samsung Service.
	Upgrade Now		Lets you upgrade the TV SW with a USB memory stick. See Page 28.
	Service	32GRAY	Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu
	Pattern		button to turn off the test patterns and exit.
	ATV Cable	Default	Lets you control the AGC gain of the analog cable channels. Don't change the default value
	AGC Gain		unless problems occur.
	DTV Cable	Default	Lets you control the AGC gain of the digital cable channels. Don't change the default value unless
	AGC Gain		problems occur.
	TV reset		Returns all settings on the TV to their factory defaults.

✎✎REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in stand- alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server product for more operating information.

20 English