Connecting an Analog Cable Converter Box and a VCR
This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to “Cable IN” so that you can use the TV’s features. When view- ing premium channels or recording with the VCR, select “Air IN” (whichever channel is vacant in your area), then use the converter box to change channels.
Caution: If you want to record one channel while watching another channel, a splitter (not included) must be added between the cable and “Cable IN”. One output of the splitter goes to “Cable OUT” and the sec- ond output is connected to IN on the cable converter box.
If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.
TV Rear Panel
From
Cable
Stereo VCR
If you have an
connections and remove the video cable. Do not connect the video cable and the
When you use a converter box with your TV there may be features that you can not program using the remote control, such as programming your favorite channels and blocking chan- nels.
Connecting CableCARD
You must obtain a CableCARD from a local cable service provider.
1 Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” is displayed on the screen. If the channel information does not already exist, the message “Updating Channel List” is displayed during channel information configura- tion.
2 The pairing information containing a telephone number, CableCARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your Service Provider.
3 When channel information configu-
ration is finished, the message “Updating Completed” is displayed. It indicates that the channel list is now updated.
Downloaded from www.Manualslib.com manuals search engine
TV Rear Panel
Incoming
Cable or
Antenna
Please insert the card as shown.
4
