Samsung HL72A650C1F user manual Storing Channels in Memory Automatic Method, Auto Program

Storing Channels in Memory (Automatic Method)

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2Press the ▲ or ▼ button to select Auto Program, then press the ENTER button.

3Press the ▲ or ▼ button to select an antenna connection, then press the

ENTER button.

➢Air: Air antenna signal.

Cable: Cable antenna signal.

Auto: Air and Cable antenna signals.

4When selecting the Cable TV system:

Press the ENTER button to start the auto program.

Press the ◄ or ► to select the correct analog signal cable system source among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.

➢ STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.

5The TV begins memorizing all available stations.

➢After all the available channels are stored, it starts to remove scrambled channels (see page 45). The Auto program menu then reappears.

➢If you want to stop Auto Programming, press the ENTER button.

The Stop Auto Program? message will be displayed. Select Yes by press- ing the ◄ or ► button, then press the ENTER button.

Press the EXIT button to exit.

Channel	Antenna	: Air
	Auto Program	►

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

Auto Program

Select the antennas to memorize.

Air			Start
Cable			Start
Auto			Start
	Move	Enter	Return
	Auto Program
Select the cable system.
Analog	STD	HRC	IRC
Digital	STD	HRC	IRC
	Start
	Move	Enter	Return
	Auto Program
Auto Program in Progress.
DTV Air : --	Air : 3
DTV Cable : -- Cable : --			Air 3
			3%
	Stop
		Enter	Return
	Auto Program
Auto Program is incomplete.
3 channels are memorized.
Air : 3 Cable : 0
	OK
		Enter	Return

English - 22