Samsung HL72A650C1F Resetting the Picture Settings to the Factory Defaults, Changing the Mode

➢To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.

➢3D glasses (including the Emitter) not manufactured by Samsung, RealD, or ilixco may not be supported.

➢The 3D glasses and the Emitter must be manufacturer by the same company.

➢If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or a headache.

Changing the Mode

Provides the function to turn on the 3D Effect. You can choose

between Mode1 and Mode2. To achieve the 3D effect, the 3D glasses shutter back and forth from the left to right and vice versa (left/right sync).

1Connect the TV, PC and 3D IR Emitter as shown in the figure.

 Press the SOURCE button to select HDMI3/DVI.

3Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Picture, then press the ENTER button.

4Press the ▲ or ▼ button to select Picture Options then press the ENTER button.

Press the ▲ or ▼ button to select 3D Effect then press the ENTER button.

Presss the ▲ or ▼ button to select Off, Mode1, or Mode2, then press the ENTER button.

Press the EXIT button to exit.

Off: Turns the 3D Effect function off.

Mode1: Mode 1 operates with right sync first.

Mode2: Mode 2 operates with left sync first.

➢If the 3D effect is not working properly, it means the Mode and 3D glasses may not be syncing properly. To put them in sync, switch to the other mode.

Easy Setting

1Press the TOOLS button on the remote control.

2Press the ▲ or ▼ button to select 3D Effect.

3Press the ENTER button to start the 3D Effect.

Picture Options

Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Film Mode	: Off
Blue Only Mode	: Off
Color Gamut	: Normal
3D Effect	: Off	►
Move	Enter	Return
Picture Options
Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Film Mode	: Off
Blue Only Mode	Off
	: Off
Color Gamut	Mode1
	: Wide
3D Effect	Mode2
	: Off
Move	Enter	Return

TOOLS

3D Effect		:	Off
	Device List
Picture Mode		:	Standard
Sound Mode		:	Custom
Sleep Timer		:	Off
		Move	Enter	Exit

Resetting the Picture Settings to the Factory Defaults

1	To select the desired picture mode, follow the Changing the Picture Standard
	instructions numbers 1 and 2. (see page 24)	Picture
2	Press the ▲ or ▼ button to select Picture Reset, then press the ENTER button.

Press the ◄ or ► button to select OK or Cancel then press the ENTER button. Press the EXIT button to exit.

➢Each mode can be reset.

Picture

Detailed Settings

Picture Options

Picture Reset ►

Detailed Settings

Picture Options

Picture Reset ►

OK

Cancel

English - 33