M40S 14
SAMSUNG HARD DISK DRIVE
DCO SET MAX ADDRESS
Control Max Address with DCO Command.
a) PROCESS
Change Max Address to designated size..
b) TARGET LBA
Set Max Address size with LBA.
c) TARGET SIZE
Set Max Address size with MB
d) RECOVER NATIVE SIZE
Recover to original size
e) DISPLAY CURRENT STATUS
Show Current Size and Original size
C. ERASE HDD
Erase all data in Drive. Write with 00 pattern
a) PROCESS
Execute Erase Drive
b) TARGET LBA
Set Erase size with LBA
c) TARGET SIZE
Set Erase size with MB.
d) ERASE MBR
Erase M.B.R. (LBA 0).
e) LOW LEVEL FORMAT
Erase full surface faster with VU Command.
D. SET MAX UDMA MODE
Control UDMA limit
a) PROCESS
Change designated speed
b) UDMA MODE [UDMA 33, UDMA 66, UDMA 100, UDMA 133, SATA 150]
Support mode depends on drive model.
c) DISPLAY CURRENT MODE
Show Current max UDMA mode
※If setmax is already set on drive, we can't use this function.
E. AUTOMATIC ACOUSTIC MANAGEMENT
Change AAM mode
a) PROCESS
Change designated speed
b) AAM MODE [DISABLE, FAST, MIDDLE, QUIET]
Support mode depends on drive model
c) DISPLAY CURRENT MODE
Show Current AAM mode